P-630-S Series Support Notes Version 1.0 May/2005 ADSL FAQ How does ADSL compare to cable modems? What is the expected throughput? What is the microfilter used for? How do I know the ADSL line is up? Does the VC-based multiplexing perform better than the LLC-based multiplexing? What are the signaling pins of the ADSL connector?
Configuration and Troubleshooting 1. How do I configure the Prestige? 2. How can I make the ADSL status icon show in the taskbar? 3. What shall I do if my connection parameter is not in the installed profiles? 4. What shall I do when the ADSL LED is off and I lost my internet access? 5.
your voice transmissions. For the details about how to connect the microfilter please refer to the user's manual. . How do I know the ADSL line is up? You can see the DSL LED on the P-630-S is keeping on when the ADSL physical layer is up.
Page 4
(2). via Device manager of Windows OS. 2. How can I make the ADSL status icon show in the taskbar? Click the ADSL icon in Control panel, the GUI below will show up.
Page 5
And then click the first option to display the ADSL status icon in the taskbar. 3. What shall I do if my connection parameter is not in the installed profiles?
Page 6
You can use Windows’s Device Manager to configure your connection parameters. Your ISP will tell you the parameters. 4. What shall I do when the ADSL LED is off and I lost my internet access?
Page 7
Please check the physical DSL line; it may be not well connected to the modem. 5. How can I do packet trace with the Prestige? (1). Click the Event tracer (2). Then the Event Tracer will record all the traffic through the modem, press the Refresh button, and you will get the updated packet trace.
Need help?
Do you have a question about the P-630-S Series and is the answer not in the manual?
Questions and answers