ZyXEL Communications P-2612HW-F1 User Manual page 78

Chapter 4 Tutorials
Click Apply to save your changes.
5
On the Network > WAN > More Connections screen, click an Edit icon to
6
create a third connection.
Configure Connection 3 similar to first two connections.
7
• Select Active.
• Enter a Name for the connection, in this case 'connection3'.
• Set the Mode to 'Routing'
• Set the Encapsulation to 'ENET ENCAP'.
• Assign a VLAN ID of 30. Enable VLAN Tagging.
78
P-2612HW-F1 User's Guide