Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for ZyXEL Communications P-2602R/RL-DXA
Summary of Contents for ZyXEL Communications P-2602R/RL-DXA
-
Page 1: Quick Start Guide
P-2602R/RL-DxA ADSL2+ VoIP IAD Quick Start Guide Version 3.40 5/2006 Edition 1... -
Page 2: Hardware Connections
Overview The P-2602R/RL-DxA ADSL2+ VoIP Integrated Access Device (IAD) is an ADSL2+ router with phone ports for making calls over the Internet (Voice over IP or VoIP). It can also use regular phone services through regular (PSTN) phone lines. See the User’s Guide for more information on all features. - Page 3 2 LINE: Use the green PSTN line cable to connect the telephone jack or the TEL or PHONE jack on a splitter to this port. Note: When the P-2602R/RL-DxA does not have power, only the phone connected to the PHONE 2 port can be used for making calls. Ensure you know which phone this is, so that in case of emergency you can make outgoing calls.
- Page 4 VOICE OVER INTERNET SETUP wizard. If the INTERNET light is off but the DSL light is on, go to Section INTERNET SETUP wizard to configure your Internet access settings. P-2602R/RL-DxA Quick Start Guide to see how to make calls through and use...
- Page 5 4 POWER: Use the power adaptor provided with your P-2602R-DxA to connect an appropriate power source to this socket. Note: If you are using T-ISDN (UR-2), connect the green wire to a TAE connector before connecting it to a telephone wall jack or the telephone splitter's TEL or PHONE jack. P-2602R/RL-DxA Quick Start Guide...
-
Page 6: Initial Configuration
INTERNET SETUP wizard to configure your Internet access settings. 3 Initial Configuration Open your web browser, and go to http://www.zyxel.com. Your P-2602R/RL-DxA tries to detect your Internet connection. This takes about two minutes. If any other screens appear, follow the directions in the screen. P-2602R/RL-DxA Quick Start Guide... - Page 7 1 Open your browser, and go to http://192.168.1.1. 3 Type (and retype) a new password and click Apply. P-2602R/RL-DxA Quick Start Guide 2 Enter the password 1234. Then, click Login. If your browser cannot find this screen, make sure your browser is configured correctly. See...
-
Page 8: Internet Setup
3.1 Internet Setup Note: You should have the information provided by your ISP. 1 Click INTERNET SETUP. Wait while the P-2602R/RL-DxA tries to detect your Internet connection. If the P-2602R/RL-DxA cannot detect your Internet connection, follow the directions in the screens. Enter the information provided by your ISP. -
Page 9: Voip Setup
When one of your VoIP accounts is registered, the P-2602RL-DxA normally uses the Internet (not the regular phone line) to make phone calls. Follow the directions in this section to make sure you can also use the regular phone line while one of your VoIP accounts is registered. P-2602R/RL-DxA Quick Start Guide... -
Page 10: Phone Calls
• If you want to dial a SIP number that only uses numbers (for example, “12345”), dial the number on your phone’s keypad. You can also set up a speed-dial entry, if you want. See the User’s Guide for instructions. P-2602R/RL-DxA Quick Start Guide... -
Page 11: Troubleshooting
• Otherwise, first dial the prefix you set in Section 3.3, and then dial the phone number. Follow these directions to call the phone that is connected to the P-2602R/RL-DxA. • (P-2602R-DxA) Use your VoIP service provider’s dialing plan. The P-2602R-DxA must be on.