More Ap Edit - ZyXEL Communications P-2612HW-F1 User Manual

Chapter 8 Wireless LAN

8.3.1 More AP Edit

Use this screen to edit an SSID profile. Click the Edit icon next to an SSID in the
More AP screen. The following screen displays.
Figure 85 Network > Wireless LAN > More AP > Edit
See Appendix E on page 533
ports. The following table describes the fields in this screen.
Table 31 Network > Wireless LAN > More AP > Edit
LABEL
Network Name
(SSID)
Hide SSID
Security Mode
MAC Filter
Edit
Back
Apply
Cancel
152
for a list of commonly-used services and destination
DESCRIPTION
The SSID (Service Set IDentity) identifies the service set with which
a wireless device is associated. Enter a descriptive name (up to 32
printable 7-bit ASCII characters) for the wireless LAN.
Note: If you are configuring the ZyXEL Device from a computer
connected to the wireless LAN and you change the
ZyXEL Device's SSID or security settings, you will lose
your wireless connection when you press Apply to
confirm. You must then change the wireless settings of
your computer to match the ZyXEL Device's new settings.
Select this check box to hide the SSID in the outgoing beacon frame
so a station cannot obtain the SSID through scanning using a site
survey tool.
See Section 8.2 on page 142
This shows whether the wireless devices with the MAC addresses
listed are allowed or denied to access the ZyXEL Device using this
SSID.
Click this button to go to the MAC Filter screen to configure MAC
filter settings. See Section 8.4 on page 153
Click this to return to the previous screen without saving changes.
Click Apply to save your changes back to the ZyXEL Device.
Click Cancel to reload the previous configuration for this screen.
for more details about this field.
for more details.
P-2612HW-F1 User's Guide