Telnet; Ftp; Figure 88 Tools > Remote Management > Telnet; Figure 89 Tools > Remote Management > Ftp - ZyXEL Communications MAX-306M1 User Manual

Chapter 18 The Remote Management Screens

18.3 Telnet

Click TOOLS > Remote Management > Telnet to control Telnet access to your
WiMAX Modem.
Figure 88 TOOLS > Remote Management > Telnet
The following table describes the labels in this screen.
Table 72 TOOLS > Remote Management > Telnet
LABEL
Server Port
Server Access
Secured Client
IP Address
Apply
Reset

18.4 FTP

Click TOOLS > Remote Management > FTP to control FTP access to your
WiMAX Modem.
Figure 89 TOOLS > Remote Management > FTP
206
DESCRIPTION
Enter the port number this service can use to access the WiMAX
Modem. The computer must use the same port number.
Select the interface(s) through which a computer may access the
WiMAX Modem using this service.
Select All to allow any computer to access the WiMAX Modem using this
service.
Select Selected to only allow the computer with the IP address that
you specify to access the WiMAX Modem using this service.
Click to save your changes.
Click to restore your previously saved settings.
User's Guide