Sip Settings - ZyXEL Communications P-2612HW-F1 User Manual

Chapter 3 Wizards

3.2.1 SIP Settings

Figure 6 VoIP Setup Wizard > SIP Settings
The following table describes the labels in this screen.
Table 4 VoIP Setup Wizard > SIP Settings
LABEL
SIP1 (- SIP10)
Settings
SIP Number
SIP Server
Address
SIP Service
Domain
Authentication
User Name
40
DESCRIPTION
Use this screen to configure SIP settings for up to 10 SIP accounts.
Enter your SIP number. In the full SIP URI (like
provider.com), this is the part before the @ symbol. You can use up to
127 printable ASCII characters.
Enter the IP address or domain name of the SIP server provided by
your VoIP service provider. You can use up to 95 printable ASCII
characters. It does not matter whether the SIP server is a proxy,
redirect or register server.
Enter the SIP service domain name. In the full SIP URI (like
1234@VoIP-provider.com), this is the part after the @ symbol. You
can use up to 127 printable ASCII Extended set characters.
Enter the user name for registering this SIP account, exactly as it was
given to you. You can use up to 95 printable ASCII characters.
1234@VoIP-
P-2612HW-F1 User's Guide