ZyXEL Communications P-2612HW-F1 User Manual page 404

Chapter 23 Logs
Table 138 802.1X Logs (continued)
LOG MESSAGE
User logout because of user
deassociation.
User logout because of no
authentication response from
user.
User logout because of idle
timeout expired.
User logout because of user
request.
No response from RADIUS. Pls
check RADIUS Server.
Use RADIUS to authenticate user. The RADIUS server is operating as the
No Server to authenticate user.
Table 139 ACL Setting Notes
PACKET
DIRECTION
(L to W)
(W to L)
(L to L/ZyXEL
Device)
(W to W/ZyXEL
Device)
Table 140 ICMP Notes
TYPE
0
3
404
DIRECTION
LAN to WAN
WAN to LAN
LAN to LAN/
ZyXEL Device
WAN to WAN/
ZyXEL Device
CODE DESCRIPTION
Echo Reply
Echo reply message
0
Destination Unreachable
Net unreachable
0
Host unreachable
1
Protocol unreachable
2
Port unreachable
3
A packet that needed fragmentation was dropped because it was set
4
to Don't Fragment (DF)
Source route failed
5
DESCRIPTION
The router logged out a user who ended the
session.
The router logged out a user from which there
was no authentication response.
The router logged out a user whose idle timeout
period expired.
A user logged out.
There is no response message from the RADIUS
server, please check the RADIUS server.
authentication server.
There is no authentication server to authenticate
a user.
DESCRIPTION
ACL set for packets traveling from the LAN to the
WAN.
ACL set for packets traveling from the WAN to the
LAN.
ACL set for packets traveling from the LAN to the
LAN or the ZyXEL Device.
ACL set for packets traveling from the WAN to the
WAN or the ZyXEL Device.
P-2612HW-F1 User's Guide