Page 2
The P-664HN-T1 is a 802.11n Dual ADSL2+ 4-port Gateway with a four-port built-in switch. This Quick Start Guide shows you how to use the P-664HN-T1 to connect to the Internet and how to configure the device settings to connect wirelessly.
2 Internet Connection Setup: Automatic Use this section to have your P-664HN-T1 autom atically detect and set up your Internet connection. 1 Open your web browser to a website. W ait while your P-664HN-T1 tries to detect your DSL connection to your ISP.
Page 4
P-664HN-T1 Quick Start Guide 1 Select Active and click Next to continue. It is strongly recomm ended that Enable OTIST is NOT selected. See section 7 for m ore information. 2 Configure your wireless settings in the screen. Click Next.
DHCP Setup and ensure that DHCP is set to None. Your ISP gives your com puter an IP address directly. If you want to access the P-664HN-T1 again, you need to use a static IP address in the sam e subnet as your P-664HN-T1 (the P-664HN-T1’s default IP address is...
If you do not, go to the next step. B) On a com puter connected to the P-664HN-T1, make sure your P-664HN-T1 and the computers on your wireless network are using the sam e wireless and wireless security settings. See the chapter on W ireless LAN in the User’s Guide for m ore inform ation.
Page 7
P-664HN-T1 Quick Start Guide 7 If your hom e has specially wired alarm equipment connected to the telephone line, ensure the installation of this equipm ent does not disable alarm equipm ent, consult your telephone company or a qualified installer.