Wps Station - ZyXEL Communications P-2612HW-F1 User Manual

Table 33 Network > Wireless LAN > WPS
LABEL
Generate
WPS Status
Release_Co
nfiguration
Apply
Refresh

8.6 WPS Station

Use this screen to set up a WPS wireless network using either Push Button
Configuration (PBC) or PIN Configuration.
Click Network > Wireless LAN >WPS Station. The following screen displays.
Figure 88 Network > Wireless LAN > WPS Station
P-2612HW-F1 User's Guide
DESCRIPTION
Click this button to have the ZyXEL Device create a new PIN.
This displays Configured when the ZyXEL Device has connected to a
wireless network using WPS or Enable WPS is selected and wireless or
wireless security settings have been changed. The current wireless and
wireless security settings also appear in the screen.
This displays Unconfigured if WPS is disabled and there is no wireless
or wireless security changes on the ZyXEL Device or you click
Release_Configuration to remove the configured wireless and
wireless security settings.
This button is available when the WPS status is Configured.
Click this button to remove all configured wireless and wireless security
settings for WPS connections on the ZyXEL Device.
Click Apply to save your changes back to the ZyXEL Device.
Click Refresh to reload the previous configuration for this screen.
Chapter 8 Wireless LAN
155