Directory Server Add And Edit - ZyXEL Communications P-2612HW-F1 User Manual

Chapter 15 Certificates

15.12 Directory Server Add and Edit

Click Security > Certificates > Directory Servers to open the Directory
Servers screen. Click Add (or the details icon) to open the Directory Server
Add screen. Use this screen to configure information about a directory server that
the ZyXEL Device can access.
Figure 173 Security > Certificates > Directory Server > Add
The following table describes the labels in this screen.
Table 101 Security > Certificates > Directory Server > Add
LABEL
Directory
Service Setting
Name
Access Protocol
Server Address
Server Port
Login Setting
Login
320
DESCRIPTION
Type up to 31 ASCII characters (spaces are not permitted) to identify
this directory server.
Use the drop-down list box to select the access protocol used by the
directory server.
LDAP (Lightweight Directory Access Protocol) is a protocol over TCP
that specifies how clients access directories of certificates and lists of
A
revoked certificates.
Type the IP address (in dotted decimal notation) or the domain name
of the directory server.
This field displays the default server port number of the protocol that
you select in the Access Protocol field.
You may change the server port number if needed, however you must
use the same server port number that the directory server uses.
389 is the default server port number for LDAP.
The ZyXEL Device may need to authenticate itself in order to assess
the directory server. Type the login name (up to 31 ASCII characters)
from the entity maintaining the directory server (usually a certification
authority).
P-2612HW-F1 User's Guide