ZyXEL Communications P-2612HW-F1 User Manual page 319

incoming certificate. If the certificate does not list a server or the listed server is
not available, the ZyXEL Device checks the servers listed here.
Figure 172 Security > Certificates > Directory Servers
The following table describes the labels in this screen.
Table 100 Security > Certificates > Directory Servers
LABEL
PKI Storage
Space in Use
#
Name
Address
Port
Protocol
Modify
Add
P-2612HW-F1 User's Guide
DESCRIPTION
This bar displays the percentage of the ZyXEL Device's PKI storage
space that is currently in use. The bar turns from green to red when the
maximum is being approached. When the bar is red, you should
consider deleting expired or unnecessary certificates before adding
more certificates.
The index number of the directory server. The servers are listed in
alphabetical order.
This field displays the name used to identify this directory server.
This field displays the IP address or domain name of the directory
server.
This field displays the port number that the directory server uses.
This field displays the protocol that the directory server uses.
Click the Edit icon to open a screen where you can change the
information about the directory server.
Click the Remove icon to remove the directory server entry. A window
displays asking you to confirm that you want to delete the directory
server. Note that subsequent certificates move up by one when you
take this action.
Click Add to open a screen where you can configure information about
a directory server so that the ZyXEL Device can access it.
Chapter 15 Certificates
319