Omni 56K Smart User's Guide
2.2.1 Driver Installation
Windows automatically starts an installation wizard when it detects new hardware. Use the wizard to select
the driver on your included CD. Browse to D:\Drivers\Omni56KSmart (where D: is your CD-ROM drive),
and click Next or OK.
Click Yes or Continue Anyway if a warning screen appears.
Restart your computer if prompted. If Windows does not automatically detect your modem, make sure that
the modem is connected and turned on. Then restart your computer or use the add new hardware option in
Control Panel to start the installation wizard. Browse on the CD to the location described above.
Figure 2-2 Windows 98 Add New Hardware Wizard
Installation
2-3