Media Source; To Specify The Media Source; Media Types And Loading - Xerox Wide Format 6622 User Manual

Media Source

Before you load an original in the Xerox Wide Format 6622 Solution, you must specify
where the media (paper) is going to be feeding from. This is referred to as the Media
Source which provides the output.

To Specify the Media Source

1. Press the Services button on the Control Panel.
The Services menu displays.
2. Select the Copy button.
3. Choose from the following Media Source selections.
• Auto Select - The machine automatically selects the correct media based on the
original size detected and the specified reduction and enlargement.
• Media Roll - Select from the Media Roll size(s) loaded in the Media Drawers.
• Cut Sheet Media - Select this to load media in the Manual Feed-in Shelf.
4. Load the original face down for scanning.
NOTE
Refer to the Copying Documents and Scanning Documents chapters, for complete
Copy and Scan instructions, respectively.

Media Types and Loading

This section describes the available media for this machine and the appropriate media
handling, loading and storage procedures.
The use of inappropriate media may result in media jams, reduced print quality,
malfunctions and other problems. To make the most effective use of the machine, we
recommend that you use only the media recommended by Xerox.
®
Xerox Wide Format 6622 Solution
User Guide
Product Overview
1-23