Scan Width - Xerox Wide Format 6622 User Manual

Scanning Documents
• Disable: The controller does not create a thumbnail image file.
• Enable: The controller creates a thumbnail image file, which can be downloaded
into Accxes Client Tools.
5. Select Save when finished.

Scan Width

The Scan Width can be changed from the standard sizes of originals if you wish. Simply
define the new width using the Variable selection.
The factory default is Standard Width Detection.
• Standard Width: This features lets the scanner determine the actual original
documents width.
• Variable Width: This feature allows you to set variable scan widths from 8.2 to 36
inches, in increments of 0.1 inch.
1. Press the Services button on the Control Panel.
The Services menu will display with Scan to Mailbox as an option.
2. Select Scan to Mailbox.
3. Select the Advanced Settings tab
4. Select Scan Width.
5. Select Variable Width when scanning a non-standard width original.
6. Then enter the desired scan width using either the numbers keypad or the scroll
buttons.
7. Select Save when finished.
3-20 ®
Xerox Wide Format 6622 Solution
User Guide