Copying Procedures; Step 1: Selecting Features; Basic Copy Tab - Xerox Wide Format 6622 User Manual

5. If desired, press Cancel to stop the job and return to the Print from File screen.
6. Always press Eject before removing the USB device. Properly removing the device
can prevent damaged or corrupted files.
NOTE
If multiple devices are attached, you will be requested to choose which to eject
from a list.

Copying Procedures

This section describes the procedures for making copies using the Xerox Wide Format
printer.
Refer to the sections listed below for instructions.

Step 1: Selecting Features

Step 2: Entering the Copy Quantity
Step 3: Copying the Original
Step 4: Stopping a Copy Job
Step 1: Selecting Features
Making a copy begins by displaying the Copy screen on the User Interface. Once that
is done, setup the copy job by selecting the necessary features from the Basic Copy,
Image Quality, and Advanced Settings and Recall tabs, and then enter the copy quantity.

Basic Copy Tab

1. Select Copy from the Services menu.
The Copy screen displays with the list below:
• Quantity
• Reduce/Enlarge
• Original Type
• Media Source
• Output Format
• Collation and Check Plot
• Scan Display
®
Xerox Wide Format 6622 Solution
User Guide
Printing and Copying Documents
2-3