Xerox Wide Format 6622 User Manual page 161

1. To enter User Mode 2 press the Menu Key twice when the printer is in the Standby
(idle) Mode.
The Menu Key lights green and the Status Display indicates U2 flashing on the left
side of the display.
2. Press the --> Key.
C6 appears in the left side of the display and the scrolling seconds time is displayed
in the right side of the display. The seconds can now be changed.
Table 20: User Mode 2
Order of Selection Sub Mode
1 Confirmation Mode - Date
2 Confirmation Mode - Time
3 Correction Mode - Year
4 Correction Mode- Month
5 Correction Mode - Day
6 Correction Mode - Hour
7 Correction Mode - Minute
8 Correction Mode - Second
3. To change the seconds, press Enter.
The seconds stop scrolling and begin to flash.
4. To change the value, press the <-- Key to increase the value and --> Key to decrease
the value.
5. Press Enter to store the value.
There are 6 setting locations: C6 - seconds, C5 - minutes, C4 - hour, C3 - day, C2 -
month, C1 - year, in sequence with each press of the --> Key.
Table 21: Correction Mode
Correction Mode
C1
C2
C3
C4
C5
C6
6. Press the --> Key again to view and correct the next location, C5 = minute.
Repeat the process to change the minutes if required
7. To change the minutes, press Enter.
®
Xerox Wide Format 6622 Solution
User Guide
Example
020531
12.00.30
C1
C2
C3
C4
C5
C6
Description
Correction Mode - Year
Correction Mode - Month
Correction Mode - Day
Correction Mode- Hour
Correction Mode -Minute
Correction Mode - Second
User Modes
02
05
31
12
00
30
7-3