Table of Contents
Advertisement
Product Overview
15. Set the Media Type Button according to the media installed.
16. Push in on the drawer until it is closed and latched.
17. Press the Select key on the Operator Panel to select the appropriate Paper Deck, then
press the Cut key. This ensures the lead edge of the paper has a clean cut and prevents
problems.
Loading the Media Roll (Roll 4)
1. Pull the Drawer Handle and open Media Drawer 3/4.
2. Rotate the Spindle in the rewind direction even if the paper is not in the rollers but
is loose. Failure to perform this step may cause the gear at the left end of the Spindle
to be broken.
3. Hold the roll at both ends and lift the roll out of the Media Drawer. The Spindle must
remain parallel when removed.
4. Place the Media Roll on a flat surface to change the roll.
CAUTION
Failure to keep the spindle parallel may cause the gear at the left end to break.
1-32
®
Xerox
Wide Format 6622 Solution
User Guide
Advertisement
Table of Contents
