User Mode 9 - U9 (Custom Setting Vellum/Tracing Paper) - Xerox Wide Format 6622 User Manual

1. With the printer in the Standby (idle) condition, press the Menu Key 8 times to enter
Mode 8.
The Menu Key lights and the display indicates U8
2. Press Enter
3. Press the--> key to change the value to 1 (On)
• Standard Setting - 0
• Custom Setting - 1
4. Press Enter key to store the value.
5. Press the Online Key to exit the User Mode.
User Mode 9 - U9 (Custom Setting
Vellum/Tracing Paper)
This mode switches between the standard setting for vellum/tracing paper and the
custom setting for tracing paper. This feature enables the Service Representative to
custom set the printer for a brand of vellum/tracing paper that has different handling
characteristics.
NOTE
The custom setting parameters (Fuser Temperature, Fuser Motor Speed, Lead
Edge Registration etc.) must first be set by the Service Representative in order
to be effective.
1. With the printer in the Stand by (idle) condition, press the Menu Key 9 times to enter
Mode 9.
The Menu Key displays U9
2. Press Enter
3. Press the --> key to change the value to 1 (On)
• Standard Setting - 0
• Custom Setting - 1
4. Press Enter key to store the value.
5. Press the Online Key to exit the User Mode.
®
Xerox Wide Format 6622 Solution
User Guide
User Modes
7-9