Media Source - Xerox 6204 Wide Format Solution User Manual

Copy

Media Source

The Media Source selections enable you to select the media for the copy job. The factory default
setting is [Auto Select].
If you must load different media than that which is currently in the machine, be sure to select the
[Original/Media Size] button on the control panel, and update the media size, type, and thickness
settings.
Procedure
1. Select the media from the [Media Source] selections.
Auto Select
The machine automatically selects the correct roll media based on the original size detected and the
specified reduction and enlargement.
Roll Media (2nd & 3rd buttons)
Select from the roll media size(s) loaded in the tray(s).
Note
Drawer 2 is an option.
Sheet
Enables you to specify the media size series, type, and thickness of the cut sheet media to be printed
from the manual feed tray (bypass).
3-82 Xerox 6204 Wide Format Solution
User Guide