Table of Contents
Advertisement
5. Turn the green Cutter Knob clockwise once and only one revolution to cut the roll
media.
NOTE
Do not rotate the Cutter Knob more than once. If it is rotated several times,
paper fragments may be left in the Cutter area and cause problems.
6. Return the Cutter to the home position by rotating the Cutter Knob until green is
seen inside of the notch. Green indicates the home position.
CAUTION
Do not rotate the Cutter Knob counter-clockwise. It will damage the Cutter Blade.
7. Carefully remove the media from the Inner Transport area.
CAUTION
Do not touch, scratch or damage the Photoconductive Photoreceptor Drum
located on the top inside of the transport area. This Photoreceptor Drum is very
expensive and important in processing the image on the prints.
8. Hold the Inner Transport Handle while releasing the Inner Transport Lock, and gently
guide it back to the original position.
®
Xerox
Wide Format 6622 Solution
User Guide
Problem Solving
9-21
Advertisement
Table of Contents
