Problem Solving
8. Return the Cutter to the home position by rotating the Cutter Knob until green is
seen inside of the notch. Green indicates the home position.
CAUTION
Do not rotate the Cutter Knob counter-clockwise (left). It will damage the Cutter
Blade.
9. Rotate the Fuser Knob counter-clockwise to release the mis-fed media from the Fuser
area.
10. Open the Exit Cover to see the misfed media.
CAUTION
There are many hot surfaces inside the Exit Cover. The Fuser Roll and Pressure
Roll are especially hot. Do not touch such parts in the following procedure.
CAUTION
There are Paper Stripper Fingers inside the Exit Cover as well. These have very
sharp tips. Do not touch such parts in the following procedure.
9-24
®
Xerox
Wide Format 6622 Solution
User Guide