Table of Contents
Advertisement
Product Overview
8. Hold the roll at both ends and place the roll into the Media Drawer.
NOTE
Ensure that the Drive Belt is underneath the plastic Roller on the right side of
the Spindle. If the belt is not correctly positioned, the Printer indicates an
out-of-media condition.
9. If the leading edge of the Media Roll is taped, cut enough to eliminate the possibility
of glue from the tape contaminating internal printer components. If the leading edge
is torn, folded, or very ragged, cut the leading edge using a sharp blade and the slit
mounted to the inside of the drawer.
1-34
®
Xerox
Wide Format 6622 Solution
User Guide
Advertisement
Table of Contents
