Automatic Print Head Check For Broken Dots At Power On Setting (Auto Hd Chk) - Toshiba B-EP Series Key Operation Specification

6.6.3.2.11 Automatic Print Head Check for Broken Dots At Power On Setting
(AUTO HD CHK)
This setting selects whether or not an automatic print head check for broken dots is to be
automatically performed when the power is turned on.
A U T O H D
A U T O H D
Default value: OFF (An automatic print head check for broken dots is not performed when the
<Supplemental Explanations>
When the [FEED] key is pressed, the menu moves in the opposite direction from when the [PAUSE]
key is pressed.
When the [FEED] and [PAUSE] keys are simultaneously pressed, the display returns to the system
mode menu.
When the [FEED] key or [PAUSE] key is pressed for 0.5 seconds or more during this parameter
setting, repeat mode is enabled and the key pressed is repeatedly entered.
The change in the parameter setting becomes effective when the [POWER] key is pressed after
setting, then stored in the backup memory.
C H K O F F
[PAUSE]
C H K
[PAUSE]
power is turned on.)
- 93 -
An automatic print head check for broken
dots is not performed when the power is
turned on.
An automatic print head check for broken
O N
dots is performed when the power is
turned on.