7.6.8
7.6.9
The factory test print is performed on the following conditions. The parameter settings and the print density fine
adjustment value are ignored.
After each test pattern is printed, the factory test print is performed when the [POWER] key is pressed.
When the [PAUSE] and [FEED] key is pressed at the same time, the display returns to the menu.
Other keys are invalid.
Print test pattern
Issue count
Sensor type
Issue mode
Label pitch
Print density fine adjustment
value
Factory Test
Auto Print(T)
Feeding 1 label
Printing 3-dot slant lines
Printing barcode
Printing characters
5 labels each
Transmissive sensor
Continuous issue
63 mm
±0
-93-