Uhf Setting / Uhf Setting - Toshiba B-EX4 SERIES Maintenance Manual

5. SYSTEM MODE
Set the maximum number of retries to write data onto the RFID tag.
The printer retries to write data onto the RFID tag for up to specified number of times. If the time-out
has come before the maximum number of retries have been done, the printer stops the retries at the
time.
Max. Min.
255 0
Set the time-out for retry to write data onto the RFID tag.
If the printer has retried for the maximum number of times within the RFID write retry time-out, the
printer stops the retries at the time.
Max. Min.
9.9 0.0

5.11.4 UHF setting / UHF SETTING

The formation related UHF setting is displayed.
Output level / POWER LEVEL
Q value / Q VALUE
AGC threshold / AGC THRESHOLD
Write AGC threshold / WRITE AGC THRESHOLD
Write minimum AGC / WRITE RETRY MIN AGC
Max. Min.
*1 *1
It sets wireless output level of UHF.
The range of output level is 26 (approximately 500mW) to 9 (approximately 10mW).
*1: The maximum and minimum value vary depend on module setting and the value is below.
B-SX704-RFID-U2-R
B-SX704-RFID-U2-EU-R/US-R /CN-R
5.11.3.4 Write retry / WRITE RETRY
Step Display
1 Decimal
Step Display
0.1 Decimal
5.11.4.1 Output level / POWER LEVEL
Step Display
1 Decimal
Sign Integer
digit
Non 3
Sign Integer
digit
Non 1
Sign Integer
digit
Non 3
Initial value Max. value
18
18
5-79
5.11 RFID Module Setting
Decimal 0 fullfil
point
digit
0 Non
Decimal 0 fullfil
point
digit
1 Non
Decimal 0 fullfil
point
digit
0 Non
Min. value
26
18
EO18-33027
Unit
times
Unit
second
Unit
Non
18
9