Installation Procedure For Optional Equipment - Toshiba B-EX4 SERIES Maintenance Manual

4. INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT

4. INSTALLATION PROCEDURE FOR OPTIONAL
EQUIPMENT
1. Make sure to unplug the power cord before installing the optional equipment.
2. Be careful not to pinch your fingers or hands with the covers.
CAUTION!
When replacing parts or performing maintenance on the printer, be careful not to damage the print
head with a hard object like a watch or a ring.
Care must be taken not to allow the
metal or glass part of a watch to touch
the print head edge.
Since the print head element can be easily damaged by shock, please treat it carefully by not hitting a
hard object against it.
The following optional equipments are provided for this printer.
B-EX204-QM-R:
B-EX204-R-QM-R:
B-EX904-H-QM-R:
B-EX904-R-QM-R:
B-EX700-CEN-QM-R: Parallel I/F card
B-EX700-RFID-H1-QM-R: HF RFID module mount kit
B-EX700-RFID-U2-EU-R: UHF RFID kit for EU
B-EX700-RFID-U2-US-R: UHF RFID kit for US
B-EX700-RFID-U2-CN-R: UHF RFID kit for CN
In this section, installation procedures for these optional equipments are described.
WARNING!
Disc cutter
Rotary cutter
Peel off module
Ribbon Saving Module B-EX700-IO-QM-R: Expansion I/O card
4. INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT
Care must be taken not to allow a
metal object like a ring to touch the
print head edge.
B-EX904-PK-QM-R: Narrow width platen kit
B-EX700-WLAN-QM-R: Wireless LAN I/F card
B-EX700-RTC-QM-R: RTC/USB host I/F card
B-EX700-RS-QM-R: Serial I/F card
4- 1
EO18-33027