Toshiba B-EX4 SERIES Maintenance Manual page 47

4. INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT
Installation Procedure
Step 1. Remove the three M3x6 screws from the side panel (L). Move the side panel (L) to the
back and push up it to remove.
Step 2. Remove the Blind Plate A from the back.
Step 3. Install the B-EX700-CEN-QM-R Parallel I/F card in the printer. And fix the 2 M-3x6 screws
from the back.
M3x6 Screw
Side Panel (L)
M3x6 Screw
Blind Plate A
M-3x 6 Screw
4-32
4.8 Parallel I/F card (B-EX700-CEN-QM-R)
EO18-33027