Toshiba B-EX4 SERIES Maintenance Manual page 46

4. INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT
4.8 PARALLEL INTERFACE card (B-EX700-CEN-QM-R)
B-EX700-CEN-QM-R is an optional parallel interface card for the B-EX4T/EX6T-QM-R Series.
1. Follow all manual instructions. Failure to do so could create safety hazards such as fire or electrocution.
• Manual instructions must be followed when installing option kits or adding cables to avoid system failures and
to insure proper performance and operation.
• Failure to follow manual instructions or any unauthorized modifications, substitution or change to this product
will void the limited product warranty.
2. Turn the power off and disconnect the power cord before installing the parallel interface card.
3. Be careful not to pinch your fingers or hands with the covers.
Packing List
The following parts are supplied with the kit. Make sure you have all items shown below.
Parallel I/F Card (1 pc.)
WARNING!
Installation Manual (1 copy
4-31
4.8 Parallel I/F card (B-EX700-CEN-QM-R)
-3x6 Screw (3 pcs.)
EO18-33027