Peel Off Module (B-Ex904-H-Qm - Toshiba B-EX4 SERIES Maintenance Manual

4. INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT
EO18-33027
4.3 PEEL OFF MODULE (B-EX904-H-QM-R)
4.3 PEEL OFF MODULE (B-EX904-H-QM-R)
This optional device is used for strip print, which cannot be used together with either B-EX204-QM-R or
B-EX204-R-QM-R.
When using a strip module together with an RFID module, be sure to install the RFID module prior to
the strip module.
All the following parts are supplied with the kit. Make sure you have all items shown below.
Rewinder Ass'y (1 pc.) Rewinder Guide Plate (1 pc.) Bush (1 pc.)
Strip Sensor (TR) (1 pc.) Strip Sensor (LED) (1 pc.) Rewind Paper Guide (1 pc.)
• Installation Manual (1 copy)
• SM-4x8B Screw (10 pcs.)
• SM-3x6B Screw (1 pc.)
• SM-4x8C Screw (1 pc.)
4-12