Toshiba B-EX4 SERIES Maintenance Manual page 17

4. INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT
4.1 DISC CUTTER (B-EX204-QM-R)
Be careful not to injure your fingers when installing the cutter unit.
All the following parts are supplied with the kit. Make sure you have all items shown below.
Description
Cutter Unit
Cutter Cover
Cutter Harness
Print Head Cleaner
1) Turn the power off and disconnect the power cord.
2) Open the top cover, and push up the hooker and take out the front cover bottom.
3) Remove the three M3x6 screws from the side panel (L). Move the side panel (L) to the back and
push up it to remove.
WARNING!
Q'ty/Unit
1 Installation manual
1 Screw (M3x6)
1 Bush
1
Hooker
M3x6 Screw
M3x6 Screw
4- 2
Description
Front Plate
Side Panel (L)
EO18-33027
4.1DISC CUTTER (B-EX204-QM-R)
Q'ty/Unit
1
2
1