Toshiba B-EX4 SERIES Maintenance Manual page 32

4. INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT
13) Raise the print head block until it stops.
14) Secure the strip sensor (LED) and strip sensor (Tr) to the printer with the M4x6 screws.
15) Connect the shorter harness of the strip sensor (Tr) to the strip sensor harness (for LED).
Strip Sensor
(Tr)
Shorter Harness of the Strip
Sensor Harness (for Tr)
Print Head Block
SMW-4x8B Screw
Strip Sensor
Harness (for LED)
4-17
4.3 PEEL OFF MODULE (B-EX904-H-QM-R)
TBD
SMW-4x8B Screw
Strip Sensor (LED)
EO18-33027