Toshiba B-EX4 SERIES Maintenance Manual page 24

4. INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT
8) Fix the harness ass'y with the clamp.
9) Connect the 9-pin connector of the harness ass'y to CN15, and 2-pin connector to CN18 on the
Main PC board, respectively.
10) Turn the head lever counterclockwise to Free position.
11) Open the ribbon shaft holder plate.
Head Lever
Lock position (Tag)
12) Raise the print head block until it stops.
CN15 (9 pins)
Harness Ass'y
Free Position
Lock position (Label)
Main PC Board
Ribbon Shaft Holder Plate
Print Head Block
4- 9
4.2 ROTARY CUTTER (B-EX204-R-QM-R)
EO18-33027