Packing List - Toshiba B-EX4 SERIES Maintenance Manual

4. INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT
4.5 RTC/USB Host I/F Card (B-EX700-RTC-QM-R)
This optional interface board is provided with the interface port, which allows for the installation of USB
devices.
1. Follow all manual instructions. Failure to do so could create safety hazards such as fire or electrocution.
• Manual instructions must be followed when installing option kits or adding cables to avoid system
failures and to insure proper performance and operation.
• Failure to follow manual instructions or any unauthorized modifications, substitution or change to this
product will void the limited product warranty.
2. Turn the power off and disconnect the power cord before installing the RTC/USB host I/F card.
3. Be careful not to pinch your fingers or hands with the covers.

Packing List

The following parts are supplied with the kit. Make sure you have all items shown below.
RTC/USB host I/F card (1 pc.)
Installation Procedure
Step 1. Remove the three M3x6 screws from the side panel (L). Move the side panel (L) to the
back and push up it to remove.
WARNING!
Installation Manual (1 copy
M3x6 Screw
M3x6 Screw
4-23
4.5 USB INTERFACE BOARD (B-EX700-RTC-QM-R)
SMW-3x6 Screw (6 pcs.)
Side Panel (L)
EO18-33027