Online Mode Lcd Display - Toshiba B-EX4 SERIES Maintenance Manual

Hide thumbs Also See for B-EX4 SERIES:
Table of Contents

Advertisement

6. ON LINE MODE

6.2 ONLINE MODE LCD DISPLAY

ONLINE MODE LCD DISPLAY EXAMPLE (English)
1.
Printer
condition
Online
Pause
Head open
st
rd
th
* The 1
, 3
and 4
* Refer "Icon display" for Icon in detail.
(*1) The printing page number is reset to zero when the printer is turned on and is cumulated by each
printing. If the cut interval issuing mode is selected, the page number is updated when paper is cut
normally.
(*2) [Remaining number] = [Reserved number] – [Normal printed number when error occurs or pause]
When remaining number is zero, it is not displayed. If the cut interval issuing mode is selected, the
remaining page number is updated when paper is cut normally.
(*3) In help guide, only key is displayed if there is help message.
(*4) The message displayed in this area is an additional information like IP address, ribbon near end etc.
The IP address is not displayed when LAN/WLAN setting is disabled even though display setting is
system mode is enabled.
The ribbon near end message is displayed when ribbon near end is detected regardless the setting
in system mode.
The ribbon near end detection is to check the remaining size of ribbon. The diameter is 38mm for 3
LCD Display
line of online mode display can be selected to display by the stting of system mode.
← Model name, Version No. (*5)
← Message
← Printing page number (*1)
← IP address etc. (*4)
← Icon
← Remaining page number *2
← Message
← Error message 1
← Error message 2
← Icon
← Remaining page number (*2)
← Message
← Error message 1
← Error message 2
← Icon, Help guide *3
6- 11
6.3 HELP DISPLAY
Display contents
st
line
nd
line *6
st
line
nd
line
EO18-33027

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents