This Paper Cannot Be Used; Roll Printing Is Selected; Roll Printing Is Selected, But Manual Paper Is Loaded; The Roll Is Empty - Canon imagePROGRAF iPF6450 Basic Manual

This paper cannot be used.

The printer has received a print job longer than the amount of roll paper left when
ManageRemainRoll in the Control Panel menu is On.
This paper cannot be used.
This paper cannot be used.
Paper that is too large for the printer has been loa-
ded.
Paper that is too small for the printer has been loa-
ded.
Paper has been loaded that is too small to print the
test pattern for printhead adjustment or nozzle
checking.

Roll printing is selected.

Roll printing is selected.
You have attempted to print on a roll, but no
roll is loaded.

Roll printing is selected, but manual paper is loaded.

Roll printing is selected, but manual paper is loaded.
A print job for rolls was received when a sheet is
loaded.

The roll is empty.

The roll is empty.
Cause
The roll is empty.
136
Cause
Cause
Cause
Press ▲ or ▼ to select Load Roll Paper, and then press the OK button. Load the roll,
and then print.
(See "Loading Rolls on the Roll Holder.")
(See "Loading Rolls in the Printer.")
Press ▲ or ▼ and select Stop Printing or press the Stop button to stop printing.
Cause
Follow these steps to replace the used roll with a new roll of the same type and size.
1.
Press the OK button and remove the roll.
(See "Removing the Roll from the Printer.")
(See "Removing Rolls From the Roll Holder.")
2.
Load the new roll.
(See "Loading Rolls on the Roll Holder.")
(See "Loading Rolls in the Printer.")
3.
If no barcode was printed on the roll, specify the type of paper.
(See "Changing the Type of Paper.")
Press the OK button and load paper of the correct size.
(See "Paper Sizes.") →User's Guide
Press the OK button and load paper of the correct size.
(See "Paper Sizes.") →User's Guide
Press the OK button and load unused paper A4/Letter (vertical) or larger. More
than one sheet may be required depending on the adjustment.
Follow these steps to load and print on a roll.
1.
Press ▲ or ▼ to select Eject Paper, press the OK button, and remove the sheet.
(See "Removing Sheets.")
2.
Load a new roll.
(See "Loading Rolls in the Printer.")
The printer now starts printing the print job.
Press ▲ or ▼ to select Stop Printing, and then press the OK button.
Corrective Action
→P.14
→User's Guide
→P.9
→P.11
→User's Guide
Corrective Action
Press ▲ or ▼ and select Stop Printing or press
the Stop button to stop printing.
Corrective Action
Corrective Action
→P.9
→P.11
Corrective Action
→P.29
→P.11
iPF6450
Basic Guide