Canon imagePROGRAF iPF6450 Basic Manual page 28

Loading Sheets in the Feed Slot
6
When the "Close Spectrophotometer Unit cov-
er." message appears, close the Spectrophotome-
ter Unit Cover.
7
When the "Close top cover." message appears,
close the Top Cover and press the OK button.
The paper will then be fixed and fed between the
Platen and the Back Cover.
• If a print job was received
After the paper is advanced, the printer starts printing the print job.
• If no print job was received
The printer now starts feeding the paper.
8
After printing, the paper is stopped momentarily with the trailing edge still held in the rollers to prevent it
from falling.
Press the OK button to release the paper.
9
Remove the sheet, keeping the front edge level as
you pull it out.
Important
10
Press the OK button.
28
•
If POP Board is accidentally removed at an angle, it may scratch the printed surface.
iPF6450
Basic Guide