Cut Sheets Cannot Be Pulled Out From The Front Paper Feed Slot; Roll Paper Cannot Be Inserted Into The Paper Feed Slot; Cannot Load Sheets - Canon imagePROGRAF iPF6450 Basic Manual

iPF6450
• If paper is jammed in the back of the printer
Remove the jammed paper from the back of
the printer.
After removing the paper, make sure there are
no other scraps of paper in the printer.
3
Press the OK button.

Cut sheets cannot be pulled out from the front paper feed slot

Cut sheets cannot be pulled out from the front paper feed slot
Cause
You have loa- Push the cut sheet from the front side of the printer towards the back side. Once the edge of the cut sheet protrudes
ded paper other from the back side of the printer, pull it out from the back side.
than POP
board.

Roll paper cannot be inserted into the paper feed slot

Roll paper cannot be inserted into the paper feed slot
The roll paper is warped.
Paper is jammed by the paper feed slot.
After a roll was advanced, the paper was manually pulled out by force, clos-
ing the Paper Feed Slot.

Cannot load sheets

Cannot load sheets
Cause
The paper source selection is incorrect.
Basic Guide
Cause
Corrective Action
Press the Load button and select the paper source.
Cut sheets cannot be pulled out from the front paper feed slot
Corrective Action
Corrective Action
Straighten out curls and reload the roll.
Remove the jammed paper.
(See "Clearing Jammed Roll Paper.")
(See "Clearing a Jammed Sheet, Fed Manually.")
Remove the roll and open the paper feed slot.
(See "Removing the Roll from the Printer.")
→P.103
→P.106
→P.14
109