Excessive Temperature Or Humidity; Please Execute Common Calibration; Please Commn Calibrt Using Above Paper; Please Calibrate Using Above Paper - Canon imagePROGRAF iPF6450 Basic Manual

Large-format printers
Hide thumbs Also See for imagePROGRAF iPF6450:
Table of Contents

Advertisement

iPF6450
Cause
The test pattern was printed too faintly.
Direct sunlight or strong lighting may be shining on the
printer and causing the sensor to malfunction.

Excessive temperature or humidity.

Excessive temperature or humidity.
Cause
The temperature or humidity where the
printer is installed is out of the acceptable
range for operation.

Please execute common calibration.

Please execute common calibration.
There is not even one Common calibration execution result.
Note that this is displayed when all of the following are satisfied.
If Set Exec. Guide is On in the Control Panel menu.
If the printer is loaded with a type of paper on which color calibration cannot be executed.

Please commn calibrt using above paper.

Please commn calibrt using above paper.
It is now recommended that you execute Common calibration.
Note that this is displayed when Set Exec. Guide in the Control Panel menu is set to On and any of the
following is true.
If the printer is loaded with a type of paper on which color calibration cannot be executed and the pre-
defined conditions since executing the Common calibration the last time have been reached.
Although a media type that color calibration can be executed on is loaded in the printer, there is no
record or performing color calibration on that media, and the designated criteria from executing Com-
mon calibration the last time have been reached.

Please calibrate using above paper.

Please calibrate using above paper.
It is now recommended that you execute Unique calibration.
Note that this is displayed when Set Exec. Guide in the Control Panel menu is set to On and any of the
following is true.
If the printer is loaded with a type of paper on which color calibration can be executed, but there is
no record of having executed color calibration on that paper or a record of having executed Common
calibration other any other type of paper.
If the printer is loaded with a type of paper on which color calibration can be executed, there is a
record of having executed color calibration on that paper, and the predefined conditions since exe-
cuting the color calibration the last time have been reached.
The Spectrophotometer Unit (optional) is installed. Although a media type that color calibration can
be executed on using the Spectrophotometer Unit is loaded in the printer and the result of a color
check on that media exceeded the threshold value, the color calibration has not been performed.
Basic Guide
Press the OK button to clear the error.
Take steps to remedy faint printing.
(See "Printing is faint.")
Press the OK button to clear the error.
Take steps to ensure the printer is not used when exposed to direct sunlight or
strong lighting.
Press ▲ or ▼ to select Stop, and then press the OK button to stop printing.
Use the printer under suitable environmental conditions. Also note that various environmental
conditions are recommended for various types of paper. For details on the recommended en-
vironmental conditions, see the Paper Reference Guide.
(See Paper Reference Guide .)
Press ▲ or ▼ to select Continue, and then press the OK button to continue with color cali-
bration. However, note that correct adjustment may not be possible.
Cause
Cause
Cause
Excessive temperature or humidity.
Corrective Action
→P.113
Corrective Action
Corrective Action
Execute Common calibration.
(See "Color Calibration Using the Printer
Sensor.")
→User's Guide
Set Set Exec. Guide to Off on the Control
Panel menu.
(See "Menu Structure.")
Execute Common calibration.
(See "Color Calibration Using
the Printer Sensor.")
→User's Guide
Set Set Exec. Guide to Off
on the Control Panel menu.
(See "Menu Structure.")
→P.66
Execute Unique calibration.
(See "Color Calibration Using
the Printer Sensor.")
→User's Guide
(See "Color Calibration Using
the Spectrophotometer Unit (op-
tion).")
Set Set Exec. Guide to Off on
the Control Panel menu.
(See "Menu Structure.")
→P.66
→P.66
Corrective Action
Corrective Action
→User's Guide
145

Advertisement

Table of Contents
loading

Table of Contents