Canon imagePROGRAF iPF6450 Basic Manual page 15

iPF6450
4
Press ▲ or ▼ to select "Yes", and then press the OK button.
The roll is rewound.
If you have selected ManageRemainRoll > On in
•
the Control Panel menu, a barcode is printed on the
Important
leading edge of the roll.
Do not remove the roll before the barcode is printed.
You will be unable to keep track of the amount of roll
paper left. (See "Keeping Track of the Amount of Roll
Paper Left.")
5
Open the Roll Feed Unit Cover.
6
Using both hands, rotate the Roll Holder toward the
back to rewind the roll.
•
If it is difficult to perform operations from the front of the printer, perform operations from the back of the printer.
If the printer has a Spectrophotometer Unit (option), lowering the Up-down Unit makes it easier to perform op-
Note
erations from the front of the printer. (See "Lowering the Up-down Unit of the Spectrophotometer Unit (option)
Manually.")
7
Holding the Roll Holder flange (a), remove the hold-
er from the Roll Holder Slot.
Basic Guide
→User's Guide
→P.16
Removing the Roll from the Printer
15