Clean Calibration White Tile Because It May Be Dirty - Canon imagePROGRAF iPF6450 Basic Manual

Clean calibration white tile because it may be dirty.

Cause
The color measurement pattern
is out of alignment.
The performance of part of the
Spectrophotometer Unit may be
impaired.
Clean calibration white tile because it may be dirty.
Clean calibration white tile because it may be dirty.
Cause
The White Cal- Remove, clean, and reinstall the White Calibration Tile.
ibration Tile
may be dirty.
If this message is still displayed after cleaning the White Calibration Tile, we recommend adjusting the Spectrophotome-
ter Sensor.
Contact your Canon dealer for more information on adjustment services.
148
(See "Automatic Banding Adjustment.")
If the same message is displayed again after performing the above operation, set Pattern Size to Large
on the Control Panel menu and perform the operation again.
(See "Menu Structure.")
Alternately, it may be resolved by selecting Air Drying in Drying Method in the Color Measurement
Preferences dialog box in the Color Calibration Management Console and selecting the Dry Separated
Chart check box if it is off.
(See "Acquiring Color Measurement Data For Any Color Chart.")
(See "Acquiring Color Measurement Data For Any Color Chart.")
Turn off the printer and wait a while before restoring power, and then perform the operation again.
If the same message is displayed again, contact your Canon dealer for assistance.
(See "Cleaning the Spectrophotometer Unit (option) Parts.")
(See "Replacing the Spectrophotometer Sensor of the Spectrophotometer Unit (option).")
Corrective Action
→P.100
→P.66
Corrective Action
→P.54
iPF6450
→User's Guide
→User's Guide
→User's Guide
Basic Guide