Roll Paper Is Not Securely In Contact With Roll Holder - Canon imagePROGRAF iPF6450 Basic Manual

iPF6450

Roll paper is not securely in contact with roll holder.

Roll paper is not securely in contact with roll holder.
Skew Check Lv. on the Control Panel menu is set to something oth-
er than Off and the roll paper is not placed securely in the Roll Hold-
er during loading.
Basic Guide
Cause
Roll paper is not securely in contact with roll holder.
Corrective Action
Follow these steps to reload the roll.
1.
Press the OK button and remove the roll holder from the printer.
2.
Insert the roll firmly on the Roll Holder until it touches the flange.
(See "Loading Rolls on the Roll Holder.")
3.
Load the Roll Holder in the printer.
→P.9
141