Canon imagePROGRAF iPF6450 Basic Manual page 44

Replacing the Printhead
10
Push the Printhead Fixer Lever toward the back of
the printer until it clicks.
11
Close the Top Cover.
Ink now fills the system. It takes about 11 minutes
for ink to fill the system.
Important
•
Note
12
Follow the instructions on the Display Screen to advance the paper.
After the paper is advanced the Initial adjustmt of Head Posi. Adj. will be executed automatically.
•
Note
44
•
Never remove an Ink Tank while the system is filling with ink.
The procedure is now finished if you have set Rep.P.head Print to Off in the Control Panel menu.
In this case, execute the Initial adjustmt of Head Posi. Adj. from the Control Panel menu.
(See "Adjustment When Installing the Printhead.")
When printing fine lines or text at high precision on glossy or semi-glossy photo or proofing paper, set the
optimal Printhead height before aligning the printhead.
(See "Enhancing Printing Quality.")
→User's Guide
→User's Guide
iPF6450
Basic Guide