Led Indicators - SMC Networks EZ Connect SMC70032AE User Manual

LED Indicators

1. Rx: Indicates data is being received.
2. Tx: Indicates data is being transmitted.
3. Sync: Indicates the physical connection between the Modem and the
Service Provider's DSLAM. While the modem is connecting, the LED will
blink and then stay in the "ON" state (green) once the connection has
been made.
4. LINK: Indicates the connection status between the ADSL modem and the
PC or network via the Ethernet connection.
5. ACT: Indicates data is being transferred between the ADSL modem and
the PC.
6. PWR/ALARM LED: Indicates power is reaching the ADSL modem and that
all functions are operating correctly. If there is a problem with connecting
to the DSLAM or there is no link to your NIC card or network, the ALARM
LED light will be Red or will flash Red.
12
Figure 1.1