Checking The Current Configuration; System Information - SMC Networks EZ Connect SMC70032AE User Manual

============= The rest is omitted ================
[244] -- 3
[248] -- 0
[252] -- 0
Actual Bit Rate (NEAR END INTERLEAVED CHANNEL): 7072 Kbps
Actual Bit Rate (FAR END INTERLEAVED CHANNEL): 736 Kbps
--------------------------------------------------
FEC(Near-End): 0
CRC(Near-End): 0
HEC(Near-End): 0
--------------------------------------------------

Checking the current configuration

System Information

Using the CLI (Command Line Interface), you can check the SYSTEM information
of the modem by using the following command:
SMC70032AE> chips info
SMC70032AE ADSL Modem version 7.1.0.25.2/4.6.4.1.3.5b (25 July 2001)
Machine Name: SMC70032AE
MAC address: 0:20:2b:0:55:20
In this example the modem version 7.1.0.25.2 refers to the ATMOS version of
the operating system, 4.6.4 refers to the BSP software version of the ADSL
chipset, and 1.3.5b refers to the firmware version of the ADSL chipset.
To check the current protocol settings and configured ports, use the bridge
device list command as displayed below.
SMC70032AE> bridge device list
Port 1: 'edd'
36
[245] -- 2 [246] -- 3
[249] -- 0 [250] -- 0
[253] -- 0 [254] -- 0
| FEC(Far-End): 0
| CRC(Far-End): 0
| HEC(Far-End): 0
[247] -- 2
[251] -- 0
[255] -- 0