Pppoa Routed Mode (Rfc2364) - SMC Networks EZ Connect SMC70032AE User Manual

PPPoA Routed Mode (RFC2364)

When your service provider is using PPPoA and you want to set up an internal
network or keep your network separate from the service provider's network, you
will need to enter the commands below. For this example we are assuming that
the LAN IP information is the same as below under LAN Settings.
LAN Settings
♦ Subnet: 192.168.1.0
♦ Subnet mask: 255.255.255.0
♦ Gateway: 192.168.1.1
1. Remove the previous configuration.
SMC70032AE> config reset bridge
SMC70032AE> ip device flush
SMC70032AE> config reset ppp
SMC70032AE> config save
Saving configuration...Configuration saved.
SMC70032AE> restart
2. Set the Ethernet gateway (the IP address of the SMC70032AE modem's
Ethernet interface).
41