Download
Share
Print this page
  1. Manuals
  2. Brands
  3. SMC Networks Manuals
  4. Modem
  5. 7003-PCI
  6. Manual

SMC Networks 7003-PCI Manual

Hide thumbs

Advertisement

Quick Links

Download this manual
D
The SMC7003-PCI is a cost effective, controller less ADSL solution that
requires minimal external components. (Only one external line driver is needed in the
analog front-end circuit).
8Mbps downstream and 768Kbps upstream over existing copper wire. This rate is more
than 140 times faster than a 56K analog modem. The SMC7003-PCI designed to meet
ANSI T1.413 Issue 2, ITU G.dmt and G.lite requirements with both splitter and
splitterless operations. In addition, the SMC7003-PCI is interoperable with all major
"central office" DSLAMs. It's software offers maximum implementation flexibility,
management and diagnosis capabilities.
Features
l
Compliant with ANSI T1.413 i2, ITU G.992.1 (G.dmt) and G.992.2
(G.lite) and G.994.1 (G.hs) in ADSL layer.
l
Supports PPP RFC2364 (PPPoA), RFC2516, IP RFC1483 and IP
RFC1577 over ATM.
l
Data rates up to 8Mbps downstream and 768Kbps upstream.
l
Compliant with Microsoft WHQL Specification.
l
Supports Win 95, 98, 2000, Millennium and NT4.0.
l
Standard Windows Wizard driver installation.
ESCRIPTION OF
The SMC7003-PCI achieves transmission rates of up to
D
ESCRIPTION OF
H
ARDWARE
H
ARDWARE
1

Advertisement

loading
Need help?

Need help?

Do you have a question about the 7003-PCI and is the answer not in the manual?

Questions and answers

Related Manuals for SMC Networks 7003-PCI

Summary of Contents for SMC Networks 7003-PCI

  • Page 1 ESCRIPTION OF ARDWARE ESCRIPTION OF ARDWARE The SMC7003-PCI is a cost effective, controller less ADSL solution that requires minimal external components. (Only one external line driver is needed in the analog front-end circuit). The SMC7003-PCI achieves transmission rates of up to 8Mbps downstream and 768Kbps upstream over existing copper wire.

  • Page 2: Connector Pinout

    ESCRIPTION OF ARDWARE Connector Pin-out The SMC7003-PCI is equipped with a RJ-11 jack for connection to the ADSL data port. The center two pins, pins 2 and 3, are used for ADSL data. For the card to make a proper ADSL connection, the installed ADSL data port should also use pins 2 and 3 for data.

  • Page 3: Step 1 - Know Your Pc's Operating System

    SMC7003-PCI NSTALLING THE STEP 1 – KNOW YOUR PC’S OPERATING SYSTEM You will need to know the exact version of Microsoft Windows installed in your computer. If you do not know or are unsure, please proceed as follows to determine your version of the Microsoft Operating System. On your desktop, right-click My Computer.
  • Page 4 SMC7003-PCI NSTALLING THE Step 2 – Determine your Connection settings You need to know your PC systems Windows OS Internet Protocol supplied by your ADSL service provider. Refer to the following chart for your ADSL Driver. Protocol Selection ð RFC1483 Bridged Ethernet over ATM ð...
  • Page 5 SMC7003-PCI NSTALLING THE STEP 3 – INSTALL THE SMC7003-PCI Caution: To avoid possible damage to your SMC7003-PCI, touch the metal chassis of your PC system to remove static charge from your person, and then remove your SMC7003-PCI from the protective anti-static bag. Shut down your computer and switch the power off.
  • Page 6 SMC7003-PCI NSTALLING THE Step 4 – Install the drivers and make a connection You will be installing drivers and then proceeding to make an Internet connection. This process requires you to enter in information as prompted by the Microsoft Installation Wizard. NOTE: You may need the Microsoft Windows Operating System installation files (CAB files) to complete the installation.
  • Page 7 At your desktop, click Start, and then select Run. The Run window appears. Insert the SMC Universal CD, then click on Browse and proceed to locate the ADSL Driver 95 CD-ROM. Then locate and select the Msdun13.exe file. The Msdun13.exe appears in the Open box.
  • Page 8 Click O K. Insert the SMC Universal CD into your systems CD drive. The Install From Disk window appears. Click Browse to locate the driver on your CD -ROM for the protocol supported by your ADSL provider:...
  • Page 9 At your desktop, click Start, and then select Run. The Run window appears. Insert the SMC Universal CD, then click on Browse and proceed to locate the ADSL Driver 95 CD-ROM. Then locate and s elect the Msdun13.exe file. The Msdun13.exe appears in the Open box.
  • Page 10 (The example uses “E” as the CD -ROM drive letter. Your drive may have a different letter.) Then click O K. The Update Device Driver Wizard will then find the SMC ADSL PCI NIC . Click Finish. NOTE: During the installation process you may be asked to insert your Windows 95 CD- ROM.
  • Page 11 Next. The Add New Hardware Wizard will appear and indicate the SMC ADSL PCI NIC has been recognized and will install a new driver. Click Next. If prompted to insert your Windows CD, do so at this time, then click OK.
  • Page 12 At the conclusion of the driver installation, the Add New Hardware Wizard window appears and displays your newly installed SMC ADSL PCI NIC. Click Finish. The System Settings Change window appears. For the PC system to setup the ADSL Modem Drivers, a system Restart is required.
  • Page 13 SMC7003-PCI NSTALLING THE WINDOWS 95/98 SETTING THE ADSL CON FIGURATION FOR RFC 1 483/1577/2364 After your PC has rebooted, right-click on the Mapi Icon, and select the Configuration option. NOTE: The service mode type will be one of the following: c ANSI T1.413 Issue 2 c ITU G.992.2 Annex A (G.lite) c ITU G.992.1 Annex A (G.dmt)
  • Page 14 The Network window appears. Select the Configuration tab, scroll the installed network component window and find SMC ADSL PCI NIC . Scroll the installed network component window and select T CP/IP àSMC ADSL PCI NIC. Then click the Properties button.
  • Page 15 SMC7003-PCI NSTALLING THE The T CP/IP Properties window will appear. Select the IP Address tab and then select the Specify an IP Address option. Enter the IP Address and Subnet Mask settings supplied by your ADSL provider. To setup a new gateway, select the Gateway tab, and then enter the setting in the New Gateway section.
  • Page 16 SMC7003-PCI NSTALLING THE The Network window appears. Click O K. 12. The System Setting Change window appears. You will be asked if you want to restart your computer. Click Yes . Congratulations, you are done. Your ADSL Internet connection is established!
  • Page 17 SMC7003-PCI NSTALLING THE Making an ADSL RFC 2364 - Point-to-Point Protocol over ATM – 95/98 connection Double- click on the SMCA PPPoA icon that appears on your desktop. The Connect To window appears. Enter the User Name and Password supplied by your Internet service provider (ISP). Then click Connect.
  • Page 18 Next you will be prompted for software drivers. Select Specify a location. Click Next. Insert the SMC Universal CD into the systems CD- ROM drive. Click Browse to locate the driver on your CD- ROM for the protocol supported by your ADSL provider:...
  • Page 19 SMC7003-PCI NSTALLING THE The Digital Signature Not Found window appears. You will be asked; Do you want to continue installation? Click Yes . The Found New Hardware Wizard will prompt that Windows has finished installing the software for this device. Click Finish. NOTE: You may be asked if you want to restart your computer, if so click Yes.
  • Page 20 SMC7003-PCI NSTALLING THE WINDOWS 2000 SETTING THE ADSL CONFIGURATION FOR RFC 1483/1577/2364 After your PC has rebooted, right-click on the Mapi Icon, and select the Configuration option. The Configuration window appears. This is the Network Protocol and PVC settings section. Enter in the VPI, VCI, and Framing values supplied by your ADSL service provider.
  • Page 21 SMC7003-PCI NSTALLING THE Making an ADSL connection RFC 1483 – Bridged Ethernet over ATM – 2000 RFC 1577 - CLASSICAL INTERNET PROTOCOL OVER ATM – 2000 Double- click My Computer, Control Panel , and then Network and Dial-up Connections. The Network and Dial-up Connections window appears. Right-click on the Local Area Connection, and then click on properties.
  • Page 22 SMC7003-PCI NSTALLING THE The previous General Tab window appears. Click O K. The Network and Dial-up Connection window appears. CLOSE this window and your connection is complete. Congratulations, you are done. Your ADSL Internet connection is established!
  • Page 23 SMC7003-PCI NSTALLING THE Making an ADSL connection RFC 2364 - Point-to-Point Protocol over ATM – 2000 Double-click on the SMCA PPPoA icon that appears on your desktop. The Connect My Connection window will appear. Enter your User Name and Password supplied by your ADSL service provider.
  • Page 24 CD- ROM for the protocol supported by your ADSL provider: 1483NT4 1577NT4 (The example uses “d” as the CD-ROM drive letter. Your drive may have a different letter.) Click O K. The Select OEM Option window will find the SMC ADSL PCI NIC, Click O K.
  • Page 25 SMC7003-PCI NSTALLING THE The Network window will appear. Click the Adapters tab to verify that the SMC ADSL PCI NIC has been found. Click on the Protocols tab and verify that the ADSL Management and Monitor Interface is present. NOTE: To review the Network window properties at any time, right-click the Network Neighborhood icon and select Properties.

  • Page 26: Windows Nt

    SMC7003-PCI NSTALLING THE WINDOWS NT 4.0 SETTING THE ADSL CONFIGURATION FOR RFC 1483 OR RFC 1577 After your PC has rebooted, right-click on the Mapi Icon, and select the Configuration option. The Configuration window appears. This is the Network Protocol and PVC settings section. Enter in the VPI, VCI, and Framing values supplied by your ADSL service provider.
  • Page 27 (The example uses “d” as the CD- ROM drive letter. Your drive may have a different letter.) Click O K. The Select OEM Option window will find the SMC ADSL PCI NIC, Click O K. The Setup Message window appears. Click O K.
  • Page 28 The Remote Access Setup window appears. Click Continue. 11. The Network window will appear. Click the Adapters tab to verify that the SMC ADSL PCI NIC has been found. Click on the Protocols tab and verify that the ADSL Management and Monitor Interface is present. Click on the Services tab to verify that the Remote Access Service is present.
  • Page 29 SMC7003-PCI NSTALLING THE WINDOWS NT 4.0 Setting the adsl configuration for RFC 2364 After your PC has rebooted, right-click on the Mapi Icon, and select the Configuration option. The Configuration window appears. This is the Network Protocol and PVC settings section. Enter in the VPI, VCI, and Framing values supplied by your ADSL service provider.
  • Page 30 SMC7003-PCI NSTALLING THE Windows NT4.0 CREATING A DIAL-UP NETWORK CONNECTION Double- click on the SMCA PPPoA icon that appears on your desktop. The Dial-Up Networking window appears and prompts for the phone number of the dial- up server. Unless instructed to enter a phone number by the ADSL service provider, enter zero “0”.

  • Page 31: Windows Millennium

    Drive letters may vary.) Then click O K. At the conclusion of the driver installation, the Add New Hardware Wizard window appears and displays your newly installed SMC ADSL PCI NIC . Click Finish. The System Setting Change window appears. Click Yes to restart your PC system and to allow the new changes to take effect.
  • Page 32 SMC7003-PCI NSTALLING THE WINDOWS MILLENNIUM SETTING THE ADSL CON FIGURATION FOR RFC 1 483/1577/2364 After your PC has rebooted, right-click on the ADSL utilities icon and select the Configuration option. The Configuration window appears. This is the Network Protocol and PVC settings section. Enter in the VPI, VCI, and Framing values supplied by your ADSL service provider.
  • Page 33 Panel, and then double-click on the Network icon. Scroll installed network component window and select TCP/IP àSMC ADSL PCI NIC. Now click the Properties button. The TCP/IP Properties window will appear. Select the IP Address tab and then select the Specify an IP Address option.
  • Page 34 SMC7003-PCI NSTALLING THE To setup a new gateway, select the Gateway tab, and then enter the setting in the New Gateway section. Click Add. Select the DNS Configuration tab. Then select the Enable DNS option. NOTE: You now need to have available the Host, Domain and DNS settings supplied by your ADSL service provider.
  • Page 35 SMC7003-PCI NSTALLING THE MAKING AN ADSL CONNECTION RFC 2364- Point to Point Protocol over ATM -Windows Me Double- click on the SMCA PPPoA icon that appears on your desktop. SMCA PPPoA The Connect To window appears. Enter the User Name and Password supplied by your internet service provider (ISP).
  • Page 36 SMC7003-PCI NSTALLING THE Editing Your Service Connection Service Connection To view or edit the ADSL connection service address, right-click the Diagnostic Tool icon (located on the Taskbar), and select the Configuration option. The PVC Setup (Permanent Virtual Connection) window displays the connection service address. Click Close to exit window.
  • Page 37 Removing Drivers Windows 95/98/NT4.0/2000/Me On the desktop, click the START Menu on the Task Bar. Select Programs. The system window appears. Select the SMC Tab, and then click on the Un-Installer Tab. Note: For W95-98-NT4, an Uninstall Finished windows message appears.

  • Page 38: Diagnostic Tools

    SMC7003-PCI NSTALLING THE Diagnostic Tools The diagnostic tool icon allows the user to monitor the ADSL connectivity, setup the service connection address, and run diagnostic tests. The Diagnostic Tools icon is displayed on the task bar as shown. By positioning the mouse cursor over the icon, the upstream and downstream rates are displayed.
  • Page 39 SMC7003-PCI NSTALLING THE Re-training Count tracks the number of ADSL connections performed. Due to unexpected line condition changes, the drivers can re-train the connection causing the Re-training Count total to increment. The Diagnostic Tool icon will flash yellow while reconnecting. ADSL implements Reed Solomon (RS) error checking: FEC COUNT TRACKS THE FORWARD E RROR CORRECTION COUNT.

  • Page 40: Troubleshooting

    ROUBLESHOOTING Trouble Shooting If you have completed the SMC7003-PCI installation procedures and your ADSL connection is not operational, then refer to the follow ing guidelines for assistance in getting your ADSL modem connection up and running. IS THERE A DIAGNOSTIC ICON ON THE TASKBAR ? üTry Restarting the PC system.
  • Page 41 PECIFICATIONS PECIFICATIONS SMC SMC7003-PCI ADSL Compatibility ANSI T1.413 Issue 2 ITU-T G.992.1 (G.DMT): Downstream data rate up to 8Mbps Upstream data rate up to 1Mbps ITU-T G.992.2 (G.Lite): Downstream data rate up to 1.5Mbps Upstream data rate up to 512Mbps...

  • Page 42: Warranty

    PECIFICATIONS EMC/Safety Compliances EMI: EN50081-1/1992->EN55022/1998, EN61000-3-2/1995,EN61000-3-3/1995 EMS: EN50082-1/1997 -> EN61000-4-2/1995, EN61000-4-3/1995, EN61000-4-4/1995 LVD: EN60950:1992/A3:1995/A4:1997,EN41003:1993 Warranty Limited Lifetime...

This manual is also suitable for:

Smc7003-pci