SMC Networks EZ Connect SMC70032AE User Manual page 44

SMC70032AE> config save
Saving configuration...Configuration saved.
SMC70032AE> restart
3. Set up the VPI value, VCI value, and the PPPoA session information (User
ID and Password) provided by your ISP. The commands below assume that
the service provider has assigned the following values: User ID is
"smc70032ae", password is "1234", CHAP is used for authentication,
VPI="0", and VCI="35".
SMC70032AE> ppp 1 welogin smc70032ae 1234 chap
SMC70032AE> ppp 1 pvc 0 35 mac
SMC70032AE> ppp 1 llc 0 (0 =LLC encapsulation/ 1=VCMUX encapsulation)
SMC70032AE> ppp 1 enable
SMC70032AE> config save
Saving configuration...Configuration saved.
SMC70032AE> restart
Note: In this example using device 1 and interface 1, the default function of
the router is to automatically add the WAN IP information when the modem is
linked. Once the modem is linked and authenticated, the IP configuration for
the routing interface will be completed since the modem acts as a DHCP client
when in PPPoA Routed mode. If the values of ID, password, VPI, or VCI
change, then re-enter the above commands related to PPP with the new,
correct information.
4. After finishing the configuration, the ADSL Sync will be stable, indicated by
a solid ADSL Sync LED.
44