When you select an envelope for the Paper Size setting, it can be fed
only from the MP tray regardless of the Paper Source setting.
You can change the priority order through the
the Setup Menu. For details, see "Setup Menu" on page 182.
Manually loading paper
Follow these steps to load a single sheet of paper from the Manual
Feed slot.
1. Insert a single sheet of paper, with the printable side up, as
far as it will go into the MP tray. Adjust the paper guides to
match the paper size you are using.
Note:
Load letterheads printable side up and with their letterhead toward
the printer.
2. Make sure that the Manual Feed check box in your printer
driver's Basic Settings menu (Windows) or Basic Settings
dialog box (Macintosh) is selected.
3. Send the print data from the computer. The Error and Ready
lights on the control panel start flashing slowly.
4. Press the N Start/Stop button. The printer loads the paper
from the MP tray.
Note:
When you no longer need to feed paper manually, be sure to clear
the Manual Feed check box in the printer driver's Basic Settings
menu (Windows) or Basic Settings dialog box (Macintosh).
setting in
Paper Handling
2
2
2
2
2
2
2
2
2
2
2
2
31