Installing Scsi Controller Driver - NEC Express5800/140Rc-4 User Manual

5-14 Installing the Operating System with Express Setup
NOTE: We recommend you to add [Network Monitor] at [Adding
Services]. [Network Monitor] can monitor the frame (or the packet)
that the computer installing [Network Monitor] sends or receives.
This tool is valuable when analyzing network trouble. For
information on how to install the tool, see the "Setting for Solving
Problems" described later in this chapter.
Optional Network Board Driver (N8104-80/86/103/111/113)
If you want to utilize optional Network Board, the network driver will be installed automatically.
Therefore, the driver attached to the Network board should not be used.
IMPORTANT: If you want to utilize optional Network Board
"N8104-103", open the [Advanced] in PROSet window and change
the [Offload TCP Segmentation] value to "Off".

Installing SCSI Controller Driver

If you utilize SCSI controller driver (N8103-65F/75), install it according to the following procedure:
1.
Start [Device Manager] from [Start] menu → [Control Panel] → [Administrative Tools]
→ [Computer Management].
2.
Double-click the SCSI Controller driver which Device Manager lists as unknown device.
3.
Click [Update Driver].
4.
When the "Update Device Driver Wizard" appears, select "Install from a list or specific
location [Advanced]" and click [Next].
5.
Select "Don't search. I will choose the driver to install" and click [Next].
6.
Click [Have Disk..].
7.
Insert "Windows Server 2003 OEM-DISK for NEC EXPRESSBUILDER" into the floppy
disk drive, enter "a:\" into "copy manufacturer's file from:" and click [OK].
8.
Specify the following driver and click [Next].
– [INITIO INI-A10XU2W PCI SCSI Controller](When N8103-65F board is installed.)
– [Adaptec SCSI Card 29320ALP - Ultra320 SCSI](When N8103-75 board is installed.)
The installation of the driver is completed.
Restart the system according to the message appeared on the screen.