NEC Express5800/140Rc-4 User Manual page 356

Table of Contents

Advertisement

9-70 Upgrading Your Server
12.
Remove the blank cover from the rear frame by using a flat-tip screwdriver.
13.
Remove two screws from the external SCSI cable connector.
14.
Align the cable end with the hole on the rear of the server.
15.
Fix the cable connector from the outside of the rear face with two screws removed in Step
13.
16.
Install the removed parts.
Blank cover

Advertisement

Table of Contents
loading

This manual is also suitable for:

N8100-1023fN8100-1024f

Table of Contents